• This high speed winding machine is applying the NITTOKU-made super high speed compact FA controller. By using indexing mechanism (180 degrees), the core loading can be performed in parallel with the winding operation. This improves working efficiency and productivity.
• Comparing with the normal flyer design, integral construction is applied to the flyer and a tip of the spindle shaft. By doing so, the movement of the flyer can be kept in minimum distance. And the spindle accuracy has been improved.
• The wrapping mechanism is located in the front position. So the stability of wire wrapping to the terminal is increased and programming can be easily performed.
• Accurate core indexing is performed fast due to NC control (Nittoku patent).
• A preventive device is installed in order to remove vibration of center former. The device enables shortened cycle time. (This machine is max. 40% faster than without this option)
• No scrap wire due to the vacuum system.
• Tooling is designed with quick change mechanism. So an easy specification change can be obtained.
• Easy change and assembly are featured due to standardization of units.

KIS-0450 / KIS-0250U

Mode	KIS-0450	KIS-0250U
Applied core size	Outer diameter : Max. ø26 mm Stack height : Max. 26 mm	Max. ø6 mm Max. 35 mm
Applicable wire gauge	Max. ø0.32 mm	Max. ø0.02 mm - 0.1 mm
No. of flyers	4 flyers (Flyer pitch 120 mm)	2 flyers (Flyer pitch 120 mm)
Flyer rotation speed	Max. 6,000 rpm *	Max. 4,500 rpm
Indexing	2 Indexing
Wire cut method	Cut by pulling
Core indexing	NC control
No. of control axes	5 axes AC servomotor
Power supply	AC200V±10% 3-phase 50/60 Hz	AC200V±10% 1-phase 50/60 Hz
Air supply	Min. 0.5 MPa
Machine dimensions	930(W) x 870(D) x 1,360(H) mm	500(W) x 1,400(D) x 1,400(H) mm
Machine weight	Approx. 300 kg	Approx. 290 kg